MPM Stage System Products


Stage Lighting Services

Sole Distributors for  MPM Stage System Products

  • A wired  stage intercom unit for use from back stage to sound & lighting control  room etc.
    The electronics for each station are mounted in a light weight and robust  ABS plastic case.
    A number of units can be linked together using standard twin screened microphone cable with 3 pin XLR connectors.

    The top  face has the headset volume control, mic on/off switch which prevents unnecessary noises being relayed over the system and the press switch  for calling indicator.
    Extra bright Yellow LED indicator, very long life  - will not break if unit is dropped.

    On the  rear face are two three way XLR connectors for the
    interconnection cables and a four way XLR for the headset connection.

    These talkback  units are interconnectable with industry standard units.

    Size -  140 x 85 x 50 mm plus XLR connectors to rear.  Weight - 230g.
    Headphone  output - suits 8 ohm to 4k ohm.
    Microphone - suits 200 ohm to 600 ohm dynamic microphones.
    4 pin XLR for headset / microphone connection.
    Side tone  rejection and audio bandwidth set to provide
    the user with good intelligibility and long term aural  comfort.

    A mains powered power unit is required to give about 24V DC @ 1 A.
    A headset  / microphone to the users preference is required.

    Please note;  production of these units has ceased due to some components not now being  available, only 3 units remain in stock; in black case.
    List price each - 129.00
    Special clearance price - set of 3 for  -  200.00
bps012  bps001
[Index] [Hire List] [MPM Products] [Contact Us]